Construction site inspections are critical for ensuring highest quality and safety measures form the start. Multiple project teams, materials, and equipment are managed by contractors, which exposes them to potential risks and hazards. It also puts the minds of the homeowners who are spending their savings, minds at ease. Routine construction site inspections are conducted during the project lifecycle. However, there are few critical inspections that are done to ensure that the regional building codes are being followed. For this, Dallas building inspection by a certified home inspector is conducted.
Here are 7 Points about Construction Site Inspection by home inspection engineers.
1. The two stages of inspection
There are two stages of construction site inspections –
- Progress inspection
To plan the phases of construction project, it is important to have construction site checklist. The inspection checklist ascertains compliance with project requirements. Once the project breaks ground, progress inspection is done every day to guarantee that requirements are being met. Also, depending on the size of the project, inspections are done by more than one person. Also, a periodic inspection is done by a specialist certified inspector. Dallas building inspection is conducted to check environment policy, accessibility, and waste management among other things.
- Quality inspection
Quality control inspections are done to ensure that the finished construction work meets the quality standards. This inspection is done to check that the project complies with all the specifications listed in the contract document. As part of quality inspection, regular site visits will be conducted to identify issues and monitor progress.
2. Regulation compliance inspection
Building regulation inspections are conducted to ensure that the work is going as per the approval of the local authority’s building control department of by a certified inspector. These inspections are conducted during –
- Laying of damp proof courses
- Drain installation
- Primary structure construction
- Roof installation
- Project completion
3. Pre-construction inspection
In the pre-construction site inspection, the property condition and its neighboring areas is surveyed before the construction begins. The pre-construction site checklist consists of checks on planning permissions, conditions, and obligations to compliance with local authorities. The project scop, budget, and schedule are the primary measures of quality during project construction.
4. Pre-pour foundation inspection
This is a critical inspection that takes place before the concrete is poured to ensure that the footing is in accordance with the design specifications. They will check the size and dimensions of the support beams and structural steel content. You have to check for the proper placement and installation of post-tension cables and copper water lines.
5. Frame inspection
Once the electrical, plumbing, and HVAC equipment are installed, the interior and exterior frame walls are complete, and the roof sheathing and roofing material are installed, the structure is considered secure from water intrusion. Nest, a pre drywall inspection is done and next the drywall is hung and insulation is added. The interior and exterior framing, wiring, roof, and plumbing is checked to ensure it matches the plans.
6. Final inspection before project closure
The final inspection at the time of project closure includes site walkthroughs to verify everything is completed as per the contract document. To declare the building ready for occupancy, the inspector will check that the list has been completed, submittals, warranties, close-out documentation, and manuals have been turned over to the owner after it has been verified for completeness.
7. Inspection reporting
A new home construction phase report is completed after each phase. The detailed home construction phase report will include digital pictures of defects that are found and black and white illustrations of proper installations. It will have detailed report by the certified home inspector with final assessment of all aspects of the house.
Home inspection engineers in Dallas understand the regulatory requirements of the area and they guide the owners in ensuring that are requirements are completely met. Construction site inspection is mandatory not only form the owner’s perspective to ensure that the work has been done as per their specifications, but also from regulatory perspective. Through regular construction site inspections any problems that may occur is caught before it escalates into uncontrolled disaster.